Teorema Millman-Analisis Rangkaian DC

loading...

Teorema Millman untuk menganalisis Rangkaian DC

Milman theorems is that a number of series voltage source is connected with the parallel resistor can be simplified to a voltage source only.

Steps to apply theorems milman this is as follows:

1. Change all the source currents are a source of tension with the principle of source transformation. So he sets up as follows below

2. Determine the total current magnitude Answer algebraic flow from all sources so that there will be a series:

3. Change the source of these flows, to be the source voltage by using the principle of source transformation.

In general theorems Millman formulated

If in the series there are a number of sources of electricity flow parallel with the resistor connected in series, then themillman theorems will be :

• Example 1
  

Specify the string Millman, of the following series!


Answer:
specify millman first strand, which is connected with the resistor R3

So that the series is to be:

• Example 2.

By using the theorems Millman, specify the current that flows in R3!



Answer:
specify millman first strand is connected with the resistor R3:


So that the series is to be:

Thus, large currents I (Flow R3) can be determined with the Ohm law:

• Example 3

Specify millman strand of a series between the terminals ab in the picture below!


Answer:


Millman rope so that it is as follows:

Posted by SlowDoWn