loading...
Audio Tone Control 2 TransistorAudio tone control circuit based transistors on these provides a maximum cut and boost of around 10dB at 10K and 50Hz.
The first BC109C transistor is acting as a buffer. It provides the circuit with a high input impedance, around 250k has a voltage gain of slightly less than unity. As the Baxendall tone control circuit is a passive design, all audio frequencies are attenuated. The position of the controls and reactance of the capacitors alters the audio response. The last transistor provides a slight boost of about 3x. The output is designed to feed an amplifier with input impedance of 10k to 250k. Both tone controls should be linear type Potentiometers.
quick Data Transistor BC109C
Low current max. 100 mA
Low voltage max. 45 V
Collector-base voltage open emitter 30 V
Collector-emitter voltage open base - 20 V
Peak collector current - 200 mA
total power dissipation Tamb £ 25 °C - 300 mW
DC current gain (hFE ) IC = 2 mA; VCE = 5 V 200 - 800
transition frequency IC = 10 mA; VCE = 5 V; f = 100 MHz 100 - MHz
Pining transistor BC109C
1 emitter
2 base
3 collector, connected to the case
0 Response to "Rangkaian Audio Tone Control 2 Transistor"
Post a Comment